Mike's Realm

Dell introduced this plugin awhile back, it’s actually a Virtual Appliance you import into vCenter.  The plugin inside vCenter is actually an Adobe Flex (Flash-based) app that gets embedded into your vSphere Client, so ensure you have Flash installed on the machine(s) you wish to use this plugin from.

Overview of Features

• Update BIOS/Firmware on Dell ESXi hosts from vCenter

• Checks for updates automatically and alerts you when there are updates available
• Can leverage an established Dell Repository to avoid data duplication–if you are a heavy Dell shop you should know what this is

• These Alarms can even trigger hosts to go into maintence mode to evacuate VMs from that particular host if the hardware event is critical (in a DRS enabled cluster of course)

• Works without (the God-awful) SilverStreak to automatically create support cases with Dell when issues arise

• Allows you to configure a proxy, if your environment requires one

• This leverages Dell Lifecycle Controllers and iDRACs to provision Dell servers somewhat auto-magically.
• First you create a Hardware Profile from a Reference Server–(configures boot order, BIOS settings, iDRAC settings, RAID config)
• Then you create a Hypervisor profile–You point at an ISO, and configure the vCenter, destination container (data center or cluster), and even a host profile for you enterprise plus users.
• Note you can “white-list” service tags so only those hosts you define can be used by the plugin to deploy against.

• So you can launch directly to your OSMA web console to connect to an OSMA agent on an ESXi host

• Does not require replacement by deploying a new OVF when a new version comes out

Read the rest of this entry »

WhatsUp v14 added some nice new active monitors to monitor fans, power supply and temperature for Dell Servers.  However that doesn’t cover everything else, Memory, CPU, Chassis Intrusion, HDD, RAID Controllers, etc.  We found the simplest way was to simply monitor for the LCD color of the Dell server.  Yes, we are sure the OID that we are looking at isn’t actually LCD color, but we like to think that it is.  The OID is actually for drsGlobalSystemStatus–which if it’s not 3, then there is a problem and the LCD is amber to reflect that.  Below is how you can setup this active monitor for WhatsUp:

First you need to configure SNMP on your DRAC, this screenshot shows the steps:

Once you have SNMP configured on your DRAC you can setup the SNMP Active monitor in WhatsUp as follows:

I was setting up a new instance of Orchestrator inside my lab and came across this issue.  the Orchestrator Server service would not start, andi nside the vCenter Orchestrator Configuration webpage, we don’t have any output in the log–so we investigate the Windows logs…

In the system log all you see is Error: The VMware vCenter Orchestrator Server service terminated with service-specific error Incorrect function..

Poking around we come across a log file @ C:\Program Files\VMware\Infrastructure\Orchestrator\app-server\bin\wrapper.log which sheds some light on the problem:

Your first thought might be disk space, did a log run away? No that isn’t the case–Java Heap refers to memory, looking inside the wrapper.conf from the command above we find more information.

Java has to allocate 2Gb of RAM on startup. My VM only had 1.5Gb, that looks like the issue–this is what you get for ignoring the Minimum System Requirements (assuming your running Orchestrator on same server as your vCenter).  Increase the RAM on your VM and this error should be gone. vCenter Server should have a minimum of 3Gb of RAM.

My most favorite keyboard shortcut in the vSphere Client is Ctrl+Shift+F – It’s like Google for vCenter. It flips to the search box and allows you to find VMs, Templates, Datastores, Networks, Hosts, Clusters, Folders,etc.

vCenter Navigation Shortcuts

These shortcuts are for when you are in the a VM’s Console

VM Console Shortcuts

These shortcuts are for when you are in the a VM’s Console

New Item Shortcuts

Use these shortcuts to create new things in vCenter

VM Shortcuts

These shortcuts are for when you select a VM or are in the a VM’s Console

I guess the guys behind vCO missed including this workflow in the default install–(hey they had to miss one after making so many hundreds–right?)

Simple little workflow, thought I’d post it up to save anyone the trouble of recreating…

[download id=”1″]

Prerequisites:

• Licensed vCenter Server – This can be an evaluation license
• Service Account to perform LDAP Lookups (vco-service is used below)
• Active Directory Security Group for vCenter Orchestrator Admins (vCOAdmins is used below)
• Microsoft SQL Database (vco is used below)
• Credentials for an account with access to above Microsoft SQL Database
• Service Account that is a member of the vCenter Orchestrator Admins Group (vCOAdmins group, vco-service is used below) – yes this can be the same account as your LDAP lookup account

Installation Guide:

1. Start Service
2. Navigate to IP:8282
3. Login with user vmware password vmware
4. Select Network on the left
1. Select IP address to bind to
2. Confirm rest of settings on page (adjust ports if any conflict with other software on the orchestrator host)
3. Click Apply changes at the bottom right
4. Network should now have a green bubble next to it, proceed
5. Select LDAP on the left
1. Select Active Directory from the dropdown if it’s not already selected
2. Enter your primary & secondary LDAP hosts (domain controllers) note: secondary is optional
3. Enter your LDAP root path, if your domain is requeny.lan enter: dc=requeny,dc=lan
4. For username enter user@domain ex: vco-service@requeny.lan
5. Password- this should be obvious
6. Enter your User lookup base path: (where all your users are located, ex: cn=Users,dc=requeny,dc=lan (this would point to the Users OU in active directory)
7. Enter your Group lookup base path: (where all your groups are located, ex: cn=Users,dc=requeny,dc=lan (this would point to the Users OU in active directory)
8. Enter the path to your vCO Admins Group, ex: cn=vCOAdmins,cn=Users,dc=requeny,dc=lan
9. Hit apply changes, if all your settings are correct LDAP should now have a green bubble next to it, but before continuing click the Test Login tab at the top and attempt to login with a user in the vCOAdmins group
10. If that test login worked, proceed on
6. Select Database on the left
1. Select SQLServer from the dropdown
2. Enter the username for SQL database (note, don’t prefix with domain, or use use@domain format here, just the username)
3. Password – this should be obvious
4. Database host IP address or DNS name – hostname of SQL server ex: sql01
5. Port: 1433 – MSSQL default, change it if your SQL server isn’t listening on the default port
6. Database name: this is the name of the database that has been created on your SQL server ex: vco
7. Instance name: whatever your instance name is, ex: sqlexpress
8. Domain: your AD domain here, use the NetBIOS name here, ex: requeny
9. Hit apply changes, if all your settings are correct you will get an error under Validation results that says: Database connection successful.  No schema found.  Please initialize database.  What this means is your connection worked, however there are no tables in the database.
10. At the top you should see a new link Install the database, click that (this should only take a couple of seconds)
11. You should now have a green bubble next to Database, proceed on
7. Select Server Certificate
1. If you don’t have a certificate CA, select Create certificate database and self-signed server certificate
1. Enter what your info in the next few boxes, examples below:
2. Common name: orchestrator
3. Organization: requeny
4. Organizational Unit: basement
5. Country: US
6. Click Create at the bottom right
7. Server Certificate on the left should now have a green bubble next to it, proceed onto step 8 below
2. If you do have a certificate CA, you can follow my other post on what to do if you use Microsoft Active Directory: Certificate Services
1. Once server certificate has a green bubble next to it, proceed onto step 8 below
8. Select Licenses
1. You can either enter a vCenter Server license manually, or Orchestrator can connect to your vCenter Server and read the license on it’s own.
2. To connect to a vCenter Server and read the license:
1. Check the use vCenter Server license radio button
2. Enter the hostname of your vCenter Server
3. Enter the port of your vCenter Server Web Services (443 by default)
4. Path: leave default
5. Enter username & password of an account that can read license data from vcenter
6. Click submit
7. If you receive an error about ‘SSL certificate is missing for this host read my other post on fixing this SSL error
8. Licenses should now have a green bubble next to it, proceed
3. To manually enter a vCenter Server license
1. Check the Add vCenter Server license manually radio button
2. Enter your vCenter Server serial number (remember you must enter a standard edition serial, foundation doesn’t include Orchestrator)
3. Enter the name of your License owner
4. Click apply changes on the bottom right
5. Licenses should now have a green bubble next to it, proceed
9. Select Plug-ins (yes we skip Startup Options for now)
1. Enter credentials for a user in the vCO Admin group
2. Username ex: vco-service
3. Password – this should be obvious
4. Click Apply changes at the bottom right
5. Plug-ins should have a green bubble next to it, as well as Startup Options at this point
6. Check the plugins you want to enable/install.  Leave the defaults and ensure vCO WebOperator & vCenter Server are checked, then hit apply changes again
7. You’ll notice the status next to many of the plugins is: Will perform installation at next server startup.
10. Select Startup Options
1. Click Install vCO server as service (This will install the Windows Service for vCenter Orchestrator)
2. Now click on Start Service to startup vCenter Orchestrator (vCenter Orchestrator typically takes upwards of 30 seconds to start, you can use the refresh link to check the status)
3. If you have any problems starting the service, click on Log on the left, and set the logging drop down to All then click Apply changes on the bottom right, go back and start the service again and then check the log for any errors
11. Open the vCenter Orchestrator Client from the Start-Menu and login!
1. Don’t forget to use your domain login DOMAIN\username
2. Don’t forget to be a member of the VCOAdmins group so you can login.
3. If you want to install the client elsewhere use the installer in the vCenter Server ISO @ vCenter-Server\vCO\vCenterOrchestrator.exe